User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 System Operations
- 3 Web Operations
- 3.1 Initialization
- 3.2 Login
- 3.3 Resetting the Password
- 3.4 Door Parameter
- 3.5 Alarm Linkage
- 3.6 Talkback Setting
- 3.7 Time Section
- 3.8 Data Capacity
- 3.9 Video Setting
- 3.10 Face Detection
- 3.11 Network Setting
- 3.12 Safety Management
- 3.13 User Management
- 3.14 Maintenance
- 3.15 Configuration Management
- 3.16 Upgrade
- 3.17 Version Information
- 3.18 Online User
- 3.19 System Log
- 3.20 Fusion Calibration
- 3.21 Advanced
- 3.22 Exit
- 4 SmartPSS AC Configuration
- 5 FAQ
- Appendix 1 Notes of Face Recording/Comparison
- Appendix 2 Cybersecurity Recommendations
16
Attendance status
For the six statuses, you can define them as needed, such as Check In for the start
of a work day and Break Out for the start of lunch break.
Network Communication
To make the access controller work normally, you need to configure parameters for network,
serial ports and Wiegand ports.
2.10.1 IP Configuration
Configure an IP address for the access controller to make it be connected to the network.
Log in to the Main Menu interface.
Select Connection > Network > IP Address, and then configure IP address
parameters.