User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 System Operations
- 3 Web Operations
- 3.1 Initialization
- 3.2 Login
- 3.3 Resetting the Password
- 3.4 Door Parameter
- 3.5 Alarm Linkage
- 3.6 Talkback Setting
- 3.7 Time Section
- 3.8 Data Capacity
- 3.9 Video Setting
- 3.10 Face Detection
- 3.11 Network Setting
- 3.12 Safety Management
- 3.13 User Management
- 3.14 Maintenance
- 3.15 Configuration Management
- 3.16 Upgrade
- 3.17 Version Information
- 3.18 Online User
- 3.19 System Log
- 3.20 Fusion Calibration
- 3.21 Advanced
- 3.22 Exit
- 4 SmartPSS AC Configuration
- 5 FAQ
- Appendix 1 Notes of Face Recording/Comparison
- Appendix 2 Cybersecurity Recommendations
18
Name
Parameter
Server IP Address
IP address of the managing platform.
Port
Port number of the managing platform.
Device ID
Subordinate device number on the managing platform.
2.10.3 Wi-Fi
You can connect the access controller to the network through Wi-Fi if the access controller has
Wi-Fi function.
Log in to the Main Menu interface.
Select Connection > Network >WiFi.
Tap to enable Wi-Fi.
Tap , select a network, and then enter the password.
You can see the information of the network in the following interface.
Wi-Fi
2.10.4 Serial Port Settings
Select serial input or serial output according to the use of the external devices.
Log in to the Main Menu interface.
Select Connection > Serial Port.
Serial port