User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 System Operations
- 3 Web Operations
- 3.1 Initialization
- 3.2 Login
- 3.3 Resetting the Password
- 3.4 Door Parameter
- 3.5 Alarm Linkage
- 3.6 Talkback Setting
- 3.7 Time Section
- 3.8 Data Capacity
- 3.9 Video Setting
- 3.10 Face Detection
- 3.11 Network Setting
- 3.12 Safety Management
- 3.13 User Management
- 3.14 Maintenance
- 3.15 Configuration Management
- 3.16 Upgrade
- 3.17 Version Information
- 3.18 Online User
- 3.19 System Log
- 3.20 Fusion Calibration
- 3.21 Advanced
- 3.22 Exit
- 4 SmartPSS AC Configuration
- 5 FAQ
- Appendix 1 Notes of Face Recording/Comparison
- Appendix 2 Cybersecurity Recommendations
20
System
2.11.1 Time
You can do date format setting, date setting, time setting, DST setting, NTP check, and time
zone settings.
Log in to the Main Menu interface.
Select System > Time, and then configure time parameters.
Time
When you select Network Time Protocol (NTP), you need to enable the NTP Check
function first. Server IP Address: enter the IP address of the time server, time of the access
controller will be synchronized with the time server.
Port: Enter the port number of the time server.
Interval (min): NPT check interval. Tap the save icon to save.
2.11.2 Face Parameter
Log in to the Main Menu interface.
Select System > Face Parameter.