User's Manual

21
Face parameter
Tap a parameter and do configuration, and then tap .
Table 2-8 Face parameters
Parameter
Description
Face Threshold
Face recognition accuracy can be adjusted. The larger the value is, the
higher the accuracy will be.
Max. Angle of Face
Set the control panel shooting angle of profiles. The larger the value is,
the wider range of the profiles will be recognized.
Pupillary Distance
Pupillary distance is the pixel value of the image between the centers of
the pupils in each eye. You need to set an appropriate value so that the
access controller can recognize faces as needed. The value changes
according to the face sizes and the distance between faces and the lens.
The closer the face is to the lens, the greater the value should be. If an
adult is 1.5 meters away from the lens, the pupillary distance value can
be within 50 to 70.
Recognition Timeout
The interval of the prompt during valid face recognition.
Invalid Face Prompt
Interval (S)
For a face has no access permission, the controller will prompt that the
face is invalid. The prompt interval is invalid face prompt interval.
Anti-fake Threshold
This function prevents people from unlocking by face images or models.
Temp Parameters
Temperature Monitoring: Enable or disable this function.
Temp Rect: Set whether to display the temperature monitoring
box or not.
Temp Monitoring Distance (cm): 50 by default.
You must
monitor your temperature standing away from the access
controller at the distance you define.
Only certain models support this parameter.