User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 System Operations
- 3 Web Operations
- 3.1 Initialization
- 3.2 Login
- 3.3 Resetting the Password
- 3.4 Door Parameter
- 3.5 Alarm Linkage
- 3.6 Talkback Setting
- 3.7 Time Section
- 3.8 Data Capacity
- 3.9 Video Setting
- 3.10 Face Detection
- 3.11 Network Setting
- 3.12 Safety Management
- 3.13 User Management
- 3.14 Maintenance
- 3.15 Configuration Management
- 3.16 Upgrade
- 3.17 Version Information
- 3.18 Online User
- 3.19 System Log
- 3.20 Fusion Calibration
- 3.21 Advanced
- 3.22 Exit
- 4 SmartPSS AC Configuration
- 5 FAQ
- Appendix 1 Notes of Face Recording/Comparison
- Appendix 2 Cybersecurity Recommendations
23
Parameter
Description
Average: Take the average temperature as the result.
Only the access controller with a temperature monitoring unit supports
this parameter.
Mask Parameters
No detect: Mask is not detected during face recognition.
Mask reminder: Mask is detected during face recognition. If the
person is detected without wearing a mask
, the system will
prompt mask reminder and passage is allowed.
Mask intercept: Mask is detected during face recognition. If the
person is detected without wearing a mask, the system will prompt
mask reminder and passage is not allowed.
Mask Recognition Threshold: When a mask is detected, this value
will be applied to face recognition. The higher the value, the higher
the precision requirements
, and harder to recognize a person
wearing a mask.
2.11.3 Image Mode
There are three options:
Indoor: Select Indoor when the access controller is installed indoors;
Outdoor: Select Outdoor when the access controller is installed outdoors;
Other: Select Other when the access controller is installed at places with backlights like
corridors and hallways.
2.11.4 Volume
Tap or to adjust the volume.
2.11.5 Language
The following languages are available: English, Italian, Spanish, Japanese, Russian, Turkish, Polish,
Korean, Arabic, Spanish (Latin America), and Thai.
2.11.6 Infrared Light
Tap or to adjust the infrared light brightness.
The larger the value is, the brighter the infrared light will be.