User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 System Operations
- 3 Web Operations
- 3.1 Initialization
- 3.2 Login
- 3.3 Resetting the Password
- 3.4 Door Parameter
- 3.5 Alarm Linkage
- 3.6 Talkback Setting
- 3.7 Time Section
- 3.8 Data Capacity
- 3.9 Video Setting
- 3.10 Face Detection
- 3.11 Network Setting
- 3.12 Safety Management
- 3.13 User Management
- 3.14 Maintenance
- 3.15 Configuration Management
- 3.16 Upgrade
- 3.17 Version Information
- 3.18 Online User
- 3.19 System Log
- 3.20 Fusion Calibration
- 3.21 Advanced
- 3.22 Exit
- 4 SmartPSS AC Configuration
- 5 FAQ
- Appendix 1 Notes of Face Recording/Comparison
- Appendix 2 Cybersecurity Recommendations
27
Features
Table 2-9 Feature description
Parameter
Description
Privacy Setting
See "2.13.1 Privacy Setting" for details.
Card No. Reverse
If the third-party card reader needs to be connected to the access
controller through the wiegand output port, you need to enable the card
number reverse function; otherwise the communication between the
access controller and the third party card reader might fail due to
protocol discrepancy.
Security Module
If the security module is enabled, you need to purchase access
control security module separately. The security module needs
separate power supply to provide power.
Once the security module is enabled, the exit button, lock control
and firefighting linkage will be invalid.
Thermogram Display
Display a heat map at the upper-left corner.
Only certain models support this function.
External Reader Temp
Monitoring
Turn it on and the card reader will also monitor the temperature of a
person.
Door Sensor
NO for normally open or NC for normally closed.
Result Feedback
Select a result feedback mode during unlock. See "2.13.2 Result
Feedback"
.