User's Manual

66
Table 3-13 Port description
Parameter
Description
Max
Connection
You can set the maximum connections of clients that the access controller can
be connected to.
Platform clients like SmartPSS AC are not counted.
TCP Port
Default value is 37777.
HTTP Port
Default value is 80. If other value is used as port number, you need to add this
value behind the address when logging in through browsers.
HTTPS Port
Default value is 443.
RTSP Port
Default value is 554.
Click OK to complete the setting.
3.11.3 Register
When connected to external network, the access controller will report its address to the server
that is designated by the user so that clients can get access to the access controller.
Log in to the web interface.
Select Network Setting > Auto Register.
Select Enable, and enter host IP, port, and sub device ID.
Table 3-14 Auto register description
Parameter
Description
Host IP
Server IP address or server domain name.
Port
Server port used for auto registeration.
Sub Device ID
Access controller ID assigned by the server.
Click OK to complete the setting.
3.11.4 P2P
Peer-to-peer computing or networking is a distributed application architecture that partitions
tasks or workloads between peers. Users can download mobile application by scanning QR
code, and then register an account so that more than one access controller can be managed on
the mobile app. You do not need to apply dynamic domain name, do port mapping or do not
need transit server.
If you are to use P2P, you must connect the access controller to external network; otherwise the
access controller cannot be used.