User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 System Operations
- 3 Web Operations
- 3.1 Initialization
- 3.2 Login
- 3.3 Resetting the Password
- 3.4 Door Parameter
- 3.5 Alarm Linkage
- 3.6 Talkback Setting
- 3.7 Time Section
- 3.8 Data Capacity
- 3.9 Video Setting
- 3.10 Face Detection
- 3.11 Network Setting
- 3.12 Safety Management
- 3.13 User Management
- 3.14 Maintenance
- 3.15 Configuration Management
- 3.16 Upgrade
- 3.17 Version Information
- 3.18 Online User
- 3.19 System Log
- 3.20 Fusion Calibration
- 3.21 Advanced
- 3.22 Exit
- 4 SmartPSS AC Configuration
- 5 FAQ
- Appendix 1 Notes of Face Recording/Comparison
- Appendix 2 Cybersecurity Recommendations
90
Access Management
4.5.1 Remotely Opening and Closing Door
After access configuration, you can remotely control door through SmartPSS AC.
Click Access Manager on the homepage. (Or click Access Guide > ).
Remotely control the door. There are two methods.
Method 1: Select the door, right click and select Open.
Remotely control (method 1)
Method 2: Click or to open or close the door.
Remotely control (method 2)
View door status by Event Info list.
Event filtering: Select the event type in the Event Info, and the event list displays
events of the selected types. For example, select Alarm, and the event list only
displays alarm events.
Event refresh locking: Click to the right of Event Info to lock or unlock the
event list, and then the real-time events cannot be viewed.
Event deleting: Click to the right of Event Info to clear all events in the event
list.