User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 System Operations
- 3 Web Operations
- 3.1 Initialization
- 3.2 Login
- 3.3 Resetting the Password
- 3.4 Door Parameter
- 3.5 Alarm Linkage
- 3.6 Talkback Setting
- 3.7 Time Section
- 3.8 Data Capacity
- 3.9 Video Setting
- 3.10 Face Detection
- 3.11 Network Setting
- 3.12 Safety Management
- 3.13 User Management
- 3.14 Maintenance
- 3.15 Configuration Management
- 3.16 Upgrade
- 3.17 Version Information
- 3.18 Online User
- 3.19 System Log
- 3.20 Fusion Calibration
- 3.21 Advanced
- 3.22 Exit
- 4 SmartPSS AC Configuration
- 5 FAQ
- Appendix 1 Notes of Face Recording/Comparison
- Appendix 2 Cybersecurity Recommendations
91
4.5.2 Setting Always Open and Always Close
After setting always open or always close, the door is open or closed all the time and cannot be
controlled manually. If you want to manually control the door again, click Normal to reset the
door status.
Click Access Manager on the homepage. (Or click Access Guide > ).
Select the needed door, and then click Always Open or Always Close.
Set always open or always close
4.5.3 Resetting Door Status
Click Normal to reset the door status, if you want to manually control the door again when you
have clicked Always Open or Always Close.
Click Access Manager on the homepage. (Or click Access Guide > ).
Select the needed door, and then click Normal. And then follow the on-screen
instructions to operate.
Reset door status