User's Manual

Installation Procedure

Fix the temperature monitoring unit to the bracket with 3 screws. Step 1

Drill six holes (five bracket installation holes and one cable entry) in the wall according Step 2

to holes in the bracket.

Fix the bracket on the wall by installing the expansion screws into the six bracket Step 3

installation holes.

Connect cables for access controller. See "2.1 Cable Connections." Step 4

Hang the access controller on the bracket hook. Step 5

Tighten the screws at the bottom of the access controller. Step 6

Apply silicon sealant to the cable outlet of the access controller. Step 7

Applying silicon sealant Figure 2-7