User's Manual

41
Login 4.2
Open IE web browser, enter the IP address of the access controller in the address bar, Step 1
and press Enter.
 IE 8 and later are supported. Otherwise you might not log in to the web.
 Make sure that the computer used to log in to the web is in the same LAN with the
device.
 7-inch model X access controllers of have dual NICs. The default management
address for ETH1 is 192.168.1.108, and for ETH2 is 192.168.2.108.
Login Figure 4-4
Enter the user name and password. Step 2
 The default administrator name is admin, and the password is the login password
after initializing the access controller. Modify the administrator regularly and keep
it properly for the sake of security.
 If you forget the administrator login password, you can click Forgot password? to
reset it. See "4.3 Resetting the Password."
Click Login. Step 3
The web interface is logged in.
Resetting the Password 4.3
When resetting the password of the admin account, your email address will be needed.
Click Forgot password? on the login interface. Step 1