User's Manual

43
 If wrong security codes are entered for consecutive five times, the administrator
will be frozen for five minutes.
Enter the security code you have received.
Step 5
Click Next. Step 6
Reset and confirm the new password. Step 7
The password should consist of 8 to 32 non-blank characters and contain at least two
types of characters among upper case, lower case, number, and special character
(excluding ' " ; : &).
Click OK, and the reset is completed. Step 8
Alarm Linkage 4.4
4.4.1 Setting Alarm Linkage
Alarm input devices can be connected to the access controller, and you can change the alarm
linkage parameter as needed.
Select Alarm Linkage on the navigation bar. Step 1
Alarm linkage Figure 4-7
Click , and then you can modify alarm linkage parameters. Step 2