User's Manual

9
Installation of the terminal Figure 2-6
Applying silicon sealant to the terminal Figure 2-7
Table 2-3 Component description
No.
Name
1
Terminal
2
Ornamental cover
3
M5 screw
4
Waterproof silica gel plug
5
Cable
Installation Procedure
Thread cable through the turnstile. Step 1
Put the waterproof silica gel plug on the cable. Step 2
Fix the terminal onto the turnstile with M5 screws. Step 3
Connect cables for terminal. See "2.1 Cable Connections." Step 4
Apply sealant to gaps between the waterproof silica gel plug and turnstile. See Figure Step 5
2-7.
Install the ornamental cover on the base of the terminal. Step 6