User's Manual

17
Access Management 3.8
You can do access management on period, unlock mode, alarm, door status, and lock holding
time.
Tap Access to go to the access management interface.
3.8.1 Period Management
You can set periods, holiday periods, holiday plan periods, door normally open periods, door
normally closed periods, and remote verification periods.
3.8.1.1 Period Configuration
You can configure 128 periods (weeks) whose number range is 0–127. You can set four periods
on each day of a period (week). Users can only unlock the door in the periods that you set.
3.8.1.2 Holiday Group
You can set group holidays, and then you can set plans for holiday groups. You can configure
128 groups whose number range is 0–127. You can add 16 holidays into a group. Configure the
start time and end time of a holiday group, and then users can only unlock the door in the
periods that you set.
You can enter names with 32 characters (including numbers, symbols, and letters). Tap to
save the holiday group name.
3.8.1.3 Holiday Plan
You can add holiday groups into holiday plans. You can use holiday plans to manage user
access permission in different holiday groups. Users can only unlock the door in the period that
you set.
3.8.1.4 NO Period
If a period is added to the NO period, then the door stays open during that period.
The NO/NC period permissions are higher than permissions in other periods.
3.8.1.5 NC Period
If a period is added to the NC period, then the door stays closed during that period. Users can
not unlock the door in this period.