User's Manual

23
IP address configuration Figure 3-12
Table 3-6 IP configuration parameters
Parameter
Description
IP Address/Subnet
Mask/Gateway IP
Address
The IP address, subnet mask, and gateway IP address should be on
the same network segment. After configuration, tap to save the
configurations.
DHCP
DHCP (Dynamic Host Configuration Protocol).
When the DHCP is enabled, the IP address can be automatically
acquired, and the IP address, subnet mask and gateway IP address
cannot be manually configured.
P2P
P2P is a private network traversal technology which enables user to
manage devices without requiring DDNS, port mapping or transit
server.
 Make sure that the computer used to log in to the web is in the same LAN with the device.
 7-inch model X terminals of have dual NICs. The default management address for ETH1 is
192.168.1.108, and for ETH2 is 192.168.2.108.
3.9.1.2 Active Register
By active registering, you can connect the terminal to the management platform, and then you
can manage the terminal through the management platform.
Configurations you have made can be cleared on the managing platform, and the terminal can
be initialized, you need to protect the platform managing permission in case of data loss caused
by improper operation.