User's Manual

28
Name
Description
person is detected without wearing a mask, the system will
prompt mask reminder and passage is allowed.
Mask intercept: Mask is detected during face recognition. If the

person is detected without wearing a mask, the system will
prompt mask reminder and passage is not allowed.
3.10.3 Image Mode
There are three options:
 Indoor: Select Indoor when the access controller is installed indoors;
 Outdoor: Select Outdoor when the access controller is installed outdoors;
 Other: Select Other when the access controller is installed at places with backlights like
corridors and hallways.
3.10.4 Fill Light Mode Setting
You can select fill light modes according to your needs. There are three modes:
 Auto: When the photo sensor detects that the ambient environment is not dark, the fill light
stays off; otherwise, the fill light will be on.
 NO: The fill light stays open.
 NC: The fill light stays closed.
3.10.5 Fill Light Brightness Setting
You can select fill light brightness according to your needs.
3.10.6 Volume Adjustment
You can adjust the beeping and voice volume.
Select System > Volume. Step 1
Select Beep Volume or Mic Volume as needed. Step 2
Tap or to adjust the volume. Step 3
3.10.7 IR Light Brightness Adjustment
The larger the value is, the clearer the images will be; otherwise the more unclear the images
will be.