User's Manual

42
Reset and confirm the new password. Step 7
The password should consist of 8 to 32 non-blank characters and contain at least two
types of characters among upper case, lower case, number, and special character
(excluding ' " ; : &).
Click OK, and the reset is completed. Step 8
Alarm Linkage 4.4
4.4.1 Setting Alarm Linkage
Alarm input devices can be connected to the terminal, and you can modify the alarm linkage
parameter as needed.
Select Alarm Linkage on the navigation bar. Step 1
Alarm linkage Figure 4-7
Click , and then you can modify alarm linkage parameters. Step 2
Modifying alarm linkage parameter Figure 4-8
Table 4-1 Alarm linkage parameter description
Parameter
Description
Alarm Input
You cannot modify the value. Keep it default.
Name
Enter a zone name.
Alarm Input Type
There are two options: NO and NC.