User's Manual

63
Parameter
Description
higher than the actual temperature, the correction value is set
to -0.5°C.
Only the terminal with a temperature monitoring unit supports this
parameter.
Mask Mode
No detect: Mask is not detected during face recognition.

Mask reminder: Mask is detected during face recognition. If the

person is detected without wearing a mask, the system will
prompt mask reminder and passage is allowed.
Mask intercept: Mask is detected during face recognition. If the

person is detected without wearing a mask, the system will
prompt mask reminder and passage is not allowed.
Click OK to finish the setting.
Step 3
Network Setting 4.9
4.9.1 TCP/IP
You need to configure IP address and DNS server to make sure that the terminal can
communicate with other devices.
Make sure that the terminal is connected to the network correctly.
Select Network Setting > TCP/IP.
Step 1
TCP/IP Figure 4-33
Configure the parameters. Step 2