User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 Connection and Installation
- 3 System Operations
- 4 Web Operations
- 4.1 Initialization
- 4.2 Login
- 4.3 Resetting the Password
- 4.4 Alarm Linkage
- 4.5 Call Configuration
- 4.6 Data Capacity
- 4.7 Video Setting
- 4.8 Face Detect
- 4.9 Network Setting
- 4.10 Safety Management
- 4.11 User Management
- 4.12 Maintenance
- 4.13 Configuration Management
- 4.14 Upgrade
- 4.15 Version Information
- 4.16 Online User
- 4.17 System Log
- 4.18 Exit
- 5 FAQ
- Appendix 1 Notes of Temperature Monitoring
- Appendix 2 Notes of Face Recording/Comparison
- Appendix 3 Cybersecurity Recommendations
9
Installation Procedure
Fix the temperature monitoring unit to the bracket with 3 screws.
Drill six holes (five bracket installation holes and one cable entry) in the wall according
to holes in the bracket.
Fix the bracket on the wall by installing the expansion screws into the six bracket
installation holes.
Connect cables for access controller. See "2.1 Cable Connections."
Hang the access controller on the bracket hook.
Tighten the screws at the bottom of the access controller.
Apply silicon sealant to the cable outlet of the access controller.
Applying silicon sealant