User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 Connection and Installation
- 3 System Operations
- 4 Web Operations
- 4.1 Initialization
- 4.2 Login
- 4.3 Resetting the Password
- 4.4 Alarm Linkage
- 4.5 Call Configuration
- 4.6 Data Capacity
- 4.7 Video Setting
- 4.8 Face Detect
- 4.9 Network Setting
- 4.10 Safety Management
- 4.11 User Management
- 4.12 Maintenance
- 4.13 Configuration Management
- 4.14 Upgrade
- 4.15 Version Information
- 4.16 Online User
- 4.17 System Log
- 4.18 Exit
- 5 FAQ
- Appendix 1 Notes of Temperature Monitoring
- Appendix 2 Notes of Face Recording/Comparison
- Appendix 3 Cybersecurity Recommendations
16
New User Info
Configure parameters on the interface.
Table 3-3 New user parameter description
Parameter
Description
User ID
Enter user IDs. The IDs can be numbers, letters, and their combinations, and
the maximum length of the ID is 32 characters. Each ID is unique.
Name
Enter names with at most 32 characters (including numbers, symbols, and
letters).
Face
Make sure that your face is centered on the picture capturing frame and the
access controller will take a picture of the new user’s face automatically.
Card
You can register five cards at most for each user. On the card registration
interface, enter your card number or swipe your card, and then the card
information will be read by the access controller.
You can enable the Duress Card function on the card registration interface.
After enabling the duress function, an alarm will be triggered if a duress card is
used to unlock the door.
Only certain models support card unlock.
PWD
The door unlocking password. The maximum length of the password is 8 digits.
User Level
You can select a user level for new users. There are two options:
User: Users only have door unlock permission.