User's Manual

22
Enable the Group Combination.
 means enabled.
 means not enabled.
3.8.3 Alarm Configuration
Administrators can manage visitors’ unlock permission through alarm configuration.
Select Access > Alarm.
Alarm
 means enabled.
 means not enabled.
Table 3-5 Parameters on the alarm interface
Parameter
Description
Anti-passback
After the anti-passback is enabled, users need to verify identities both for
entry and exit; otherwise an alarm will be triggered.
If a person enters with the identity checked and exits without the
identity checked, an alarm will be triggered when the person tries to
enter again and the person will have no permission to unlock the door
any more.
If a person enters without the identity checked, an alarm will be
triggered when the person tries to exit with the identity checked, and
the person will have no permission to unlock the door any more.
Duress
After enabling the duress function, an alarm will be triggered when a
duress card or duress password is used to unlock the door.
Illegal Card
Exceeding
Time
After an unauthorized card is used to unlock the door more than 5 times in
50 seconds, an alarm will be triggered.
Intrusion
An intrusion alarm will be triggered if a door is unlocked without having the
door contact released.
Door Sensor
A timeout alarm will be triggered if the time that a user takes to unlock the