User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 Connection and Installation
- 3 System Operations
- 4 Web Operations
- 4.1 Initialization
- 4.2 Login
- 4.3 Resetting the Password
- 4.4 Alarm Linkage
- 4.5 Call Configuration
- 4.6 Data Capacity
- 4.7 Video Setting
- 4.8 Face Detect
- 4.9 Network Setting
- 4.10 Safety Management
- 4.11 User Management
- 4.12 Maintenance
- 4.13 Configuration Management
- 4.14 Upgrade
- 4.15 Version Information
- 4.16 Online User
- 4.17 System Log
- 4.18 Exit
- 5 FAQ
- Appendix 1 Notes of Temperature Monitoring
- Appendix 2 Notes of Face Recording/Comparison
- Appendix 3 Cybersecurity Recommendations
25
Name
Parameter
Server IP Address
IP address of the managing platform.
Port
Port number of the managing platform.
Device ID
Subordinate device number on the managing platform.
3.9.1.3 Wi-Fi
You can connect the access controller to the network through Wi-Fi if the access controller has
Wi-Fi function.
3.9.2 Serial Port Settings
Select serial input or serial output according to the use of the external devices.
Select Connection > Serial Port.
Serial port
Select Serial Input when external devices that are with card reading and writing functions
are connected to the access controller. Serial Input is selected to enable access card
information to be sent to the access controller and the management platform.
For access controllers with face recognition, card reading and writing functions, if you
select Serial Output, access controller will send lock/unlock information to the access
controller. There are two types of lock/unlock information:
User ID
Card No.
Select OSDP Input when card reader of OSDP protocol is connected to the access
controller. The access controller can send card information to the management platform.
3.9.3 Wiegand Configuration
Select Wiegand Input or Wiegand Output accordingly.
Select Connection > Wiegand.