User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 Connection and Installation
- 3 System Operations
- 4 Web Operations
- 4.1 Initialization
- 4.2 Login
- 4.3 Resetting the Password
- 4.4 Alarm Linkage
- 4.5 Call Configuration
- 4.6 Data Capacity
- 4.7 Video Setting
- 4.8 Face Detect
- 4.9 Network Setting
- 4.10 Safety Management
- 4.11 User Management
- 4.12 Maintenance
- 4.13 Configuration Management
- 4.14 Upgrade
- 4.15 Version Information
- 4.16 Online User
- 4.17 System Log
- 4.18 Exit
- 5 FAQ
- Appendix 1 Notes of Temperature Monitoring
- Appendix 2 Notes of Face Recording/Comparison
- Appendix 3 Cybersecurity Recommendations
31
3.11.2 USB Import
Only data in the USB that was exported from one access controller can be imported into
another access controller.
Select USB > USB Import.
USB Import
Select the data type that you want to import.
Tap OK.
Data in the USB flash drive will be imported into the access controller.
3.11.3 USB Update
USB flash drive can be used to update the system.
Rename the updating file name to "update.bin", and save the "update.bin" file in the
root directory of the USB flash drive.
Select USB > USB Update.
Tap OK.
The update starts, and the access controller restarts after the update is finished.
Features
You set privacy, card number reverse, security module, door sensor type, and result feedback.