User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 Connection and Installation
- 3 System Operations
- 4 Web Operations
- 4.1 Initialization
- 4.2 Login
- 4.3 Resetting the Password
- 4.4 Alarm Linkage
- 4.5 Call Configuration
- 4.6 Data Capacity
- 4.7 Video Setting
- 4.8 Face Detect
- 4.9 Network Setting
- 4.10 Safety Management
- 4.11 User Management
- 4.12 Maintenance
- 4.13 Configuration Management
- 4.14 Upgrade
- 4.15 Version Information
- 4.16 Online User
- 4.17 System Log
- 4.18 Exit
- 5 FAQ
- Appendix 1 Notes of Temperature Monitoring
- Appendix 2 Notes of Face Recording/Comparison
- Appendix 3 Cybersecurity Recommendations
46
Configure the parameters.
Local (1)
Table 4-2 Parameter description
Parameter
Description
Device Type
The access controller can only work as a unit door station.
Centre Call No.
Enter a number to be identified by the management center. It should be
"888888" plus three numbers.
VTO No.
Cannot be configured.
Group Call
When enabled, a call from the access controller to a master indoor
station will also be sent to all its extention indoor stations.
Transmission
Mode
Mode1: Real-time call but the video and sound may be lagging with
poor network.
Mode2: Not real-time call but ensures smooth video and sound.
Click Confirm.
4.5.1.2 Other Device as SIP Server
Log in to the web.
Select Talkback Setting > Local.
Configure the parameters.
Local (2)
Table 4-3 Parameter description
Parameter
Description
Device Type
The access controller can work as a unit door station or fence
station.
Centre Call No.
Enter a number to be identified by the management center. It
should be "888888" plus three numbers.
VTO No.
Enter a number for the access controller.
It should be four digits. The first two should be 80 and the
last two starts with 01, such as 8001.
If there are multiple door stations, VTO numbers cannot be