User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 Connection and Installation
- 3 System Operations
- 4 Web Operations
- 4.1 Initialization
- 4.2 Login
- 4.3 Resetting the Password
- 4.4 Alarm Linkage
- 4.5 Call Configuration
- 4.6 Data Capacity
- 4.7 Video Setting
- 4.8 Face Detect
- 4.9 Network Setting
- 4.10 Safety Management
- 4.11 User Management
- 4.12 Maintenance
- 4.13 Configuration Management
- 4.14 Upgrade
- 4.15 Version Information
- 4.16 Online User
- 4.17 System Log
- 4.18 Exit
- 5 FAQ
- Appendix 1 Notes of Temperature Monitoring
- Appendix 2 Notes of Face Recording/Comparison
- Appendix 3 Cybersecurity Recommendations
51
Add one indoor monitor
Table 4-6 Parameter description
Parameter
Description
First Name
To differentiate each indoor monitor.
Last Name
Nick Name
Room No.
Room number of the indoor monitor.
It can contain up to five digits and must be the same as the one
configured on the indoor monitor.
When there are master and extension indoor monitors, the room
number of master indoor monitor should end with "-0", and that
of extension indoor monitors with "-1", "-2", "-3"…For example,
the master indoor monitor is 101-0, extension monitors are
101-1, 101-2 and 101-3.
Register Type
Keep the default value.
Register Password
Click OK.
You can also click Export to export the room number and import to other devices.
4.5.4.2 Add Indoor Monitors in Batches
You can add up to 1024 indoor monitors.
Log in to the web.
Select Talkback Setting > Room No. Management.
At the bottom, enter numbers for Unit Layer Amount, Room Amount in One Layer, First
Floor Number and Second Floor Number.
Unit layer amount can be 1–99, room amount in one layer 1–99, and floor number
1–99999.