User's Manual
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Overview
- 2 Connection and Installation
- 3 System Operations
- 4 Web Operations
- 4.1 Initialization
- 4.2 Login
- 4.3 Resetting the Password
- 4.4 Alarm Linkage
- 4.5 Call Configuration
- 4.6 Data Capacity
- 4.7 Video Setting
- 4.8 Face Detect
- 4.9 Network Setting
- 4.10 Safety Management
- 4.11 User Management
- 4.12 Maintenance
- 4.13 Configuration Management
- 4.14 Upgrade
- 4.15 Version Information
- 4.16 Online User
- 4.17 System Log
- 4.18 Exit
- 5 FAQ
- Appendix 1 Notes of Temperature Monitoring
- Appendix 2 Notes of Face Recording/Comparison
- Appendix 3 Cybersecurity Recommendations
66
Click OK to complete the setting.
4.9.3 Register
When connected to external network, the access controller will report its address to the server
that is designated by the user so that clients can get access to the access controller.
Select Network Setting > Auto Register.
Select Enable, and enter host IP, port, and sub device ID.
Table 4-13 Auto register description
Parameter
Description
Host IP
Server IP address or server domain name.
Port
Server port used for auto registeration.
Sub Device ID
Access controller ID assigned by the server.
Click OK to complete the setting.
4.9.4 P2P
Peer-to-peer computing or networking is a distributed application architecture that partitions
tasks or workloads between peers. Users can download mobile application by scanning QR
code, and then register an account so that more than one access controller can be managed on
the mobile app. You do not need to apply dynamic domain name, do port mapping or do not
need transit server.
If you are to use P2P, you must connect the access controller to external network; otherwise the
access controller cannot be used.
P2P