Dahua C Series Home Camera Quick Start Guide V 1.0.5 ZHEJIANG DAHUA VISION TECHNOLOGY CO., LTD.
Dahua IR Bullet Network Camera Quick Start Guide 1 Packing List Device × 1 Power Adapter ×1 Iron Plate(for magnetic installation) ×1 USB ×1 QSG ×1 Screw Package ×1 2
Dahua IR Bullet Network Camera Quick Start Guide 2 Product Appearance Figure 2-1 Figure 2-2 Figure 2-3 The following table shows more information about each component. No.
Dahua IR Bullet Network Camera Quick Start Guide Table 2-1 Note To reset, long press for 8 seconds till the light is off; to enable WPS, just press the button. The following table shows more information about status of indicator light. Indicator light status Device status Red light stably on Booting Slowly flashing green Quickly flashing green Green light stably on Booting completed. Waiting for Wi-Fi configuration. Entering smart configuration status.
Dahua IR Bullet Network Camera Quick Start Guide 3 Operation by Easy4ip App To operate the device from your smart phone, do the following: 1. Power on the device with power adapter connected. 2. Connect your smart phone to your Wi-Fi network, and then scan the “Easy4ip” Quick Recognition (QR) on the packing box to download and install the Easy4ip App. 3. Open Easy4ip App (take iOS as an example), type user name and password and then tap Login to log on to the App, see Figure 3-1.
Dahua IR Bullet Network Camera Quick Start Guide 5. 6. Scan the QR code on the back of the device to get the SN (Serial number). You can also tap Continue without scanning and manually input the SN on the next screen. Figure 3-3 Type the user name and password of the added device (both are admin by default).
Dahua IR Bullet Network Camera Quick Start Guide 7. 8. Tap Yes, config Wi-Fi and type your Wi-Fi password, and then tap Next. Note During the Wi-Fi connecting process, please keep your smartphone and the camera within 30 cm. Figure 3-5 The device will be added to your account, see figure 3-7. Figure 3-6 Figure 3-7 Note If you have more devices, please follow step 4 to step 8 to add one by one.
Dahua IR Bullet Network Camera Quick Start Guide 4 Device Installation Note Before installation, please make sure the installation environments can at least support 3x weight of the device. 4.1 Non-metal Surface To install the device on the non-metal surface, do the following: 1. Fix the metal plate with screws. 2. Stick the camera onto the metal plate. 4.2 Metal Surface To install the device on the non-metal surface, directly stick the camera onto the metal surface.
Dahua IR Bullet Network Camera Quick Start Guide 5 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Dahua IR Bullet Network Camera Quick Start Guide ZHEJIANG DAHUA VISION TECHNOLOGY CO., LTD. Address: No.1199, Bin'an Road, Binjiang District, Hangzhou, P.R. China Postcode: 310053 Tel: +86-571-87688883 Fax: +86-571-87688815 Email:overseas@dahuatech.com Website: www.dahuasecurity.