User's Manual

13
5
5 5
5 Device Installation
Device InstallationDevice Installation
Device Installation4
4 4
4 Network Configuration
Network Configuration Network Configuration
Network Configuration
The IP address of all the cameras is the same when leaving factory (default IP 192.168.1.108). To
make the camera access to the network smoothly, please plan the available IP segment reasonably
according to the actual network environment.
NOTE:
The camera can be configured only when the IP addresses of the camera and the computer are in the
same network segment.
Step 1
Power on the device with power adapter,Connect the device to computer.
Step 2
Double click the “smart cms.exe”，The user name and password are admin and admin .
Shown in Figure 4-1.
Figure 4-1
Step 3
Click , and then click to enter the interface where you can find IP
address.Shown in figure 4-2.
Input your username and password (Default username is admin and password is admin respectively).
Figure 4-2