Quick Start Guide

System Configurations 36
4.3.1.2 Signal Group
Select Setup > Signal Management > Signal Group.
The Signal Group interface is displayed. See Figure 4-25. Devices in the device list can be
added to group list.
Signal group Figure 4-25
4.3.1.3 Adding Video Wall
Select Setup > Display Management > Video Wall Setup. Step 1
The Video Wall Setup interface is displayed. See Figure 4-26.
Video wall setup Figure 4-26
Click Add Video Wall to add. Step 2
4.3.2 Adding TV Wall through Decoder Web Interface
This part takes decoder web interface as an example.
 This part is operated on the decoder web interface.
 For more specific configurations, refer to decoder user’s manual.
Enter IP address of decoder at address bar of the browser, and press Enter to enter Step 1
decoder login interface. See Figure 4-27.