Quick Start Guide
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Introduction
- 2 Start and Shutdown
- 3 Quick Configuration
- 4 System Configurations
- 4.1 Preview
- 4.2 Playback
- 4.3 TV Wall
- 4.4 Platform
- 4.5 PTZ Control
- 4.6 Settings
- 4.7 Extension
- Appendix 1 Cybersecurity Recommendations
System Configurations 45
Device Figure 4-37
Click Add. Step 4
The interface is shown in Figure 4-38.
Add a device (1) Figure 4-38
Select Protocol, Manufacturer, Add Type, Device Category, Organization, Video Step 5
Server, input IP Address, Device Port and Username/Password.
The parameters vary with the selected protocols. The actual interface shall prevail.