Quick Start Guide
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Introduction
- 2 Start and Shutdown
- 3 Quick Configuration
- 4 System Configurations
- 4.1 Preview
- 4.2 Playback
- 4.3 TV Wall
- 4.4 Platform
- 4.5 PTZ Control
- 4.6 Settings
- 4.7 Extension
- Appendix 1 Cybersecurity Recommendations
System Configurations 60
General Figure 4-54
Set the parameters. Refer to Table 4-11. Step 2
Table 4-11 General parameter description
Parameter
Description
Name
Set network keyboard name.
Language
Select language.
Date
Set date.
Time
Set time.
Format
Set time format, including 24-hour and 12-hour.
Separator
Set date separator, including ".", "-" and "/". When it takes effect, system time
is displayed as "2019.10.17", "2019-10-17" and "2019/10/17".
Excel
Excel config file import separator. It is comma by default. Italian config file
shall use semicolon.
Long name
In the long name mode, channel name can contain 40 characters. This
function is used if channel name is too long and cannot be displayed on
previous interface completely.
Click Save. Step 3
4.6.2.6 Hardware
You can adjust volume, and set the locking time of network keyboard.
On the Settings interface, click Hardware tab. Step 1
The Hardware interface is displayed. See Figure 4-55.