Quick Start Guide
Table Of Contents
- Foreword
- Important Safeguards and Warnings
- 1 Introduction
- 2 Start and Shutdown
- 3 Quick Configuration
- 4 System Configurations
- 4.1 Preview
- 4.2 Playback
- 4.3 TV Wall
- 4.4 Platform
- 4.5 PTZ Control
- 4.6 Settings
- 4.7 Extension
- Appendix 1 Cybersecurity Recommendations
System Configurations 65
In System authority, select role authority to operate the system. Step 3
Tick the check box to enable the authority.
Tick All to select all authorities.
Configure operation authority of device input channel. Step 4
1) Click Input Channel.
The Input Channel interface is displayed. See Figure 4-61.
Input channel Figure 4-61
2) Click .
The Add channel interface is displayed. See Figure 4-62.
Add channel Figure 4-62
3) Tick the check box of corresponding channel, and click OK.