User's Guide

18
<<
Choose the target language.
Language
To make the X, Y and Z axes back to the mechanical zero point.
Home
En
De
Fr
Es
OK
Click the arrow to adjust the
nozzle so that it just touches
the platform
Extruder
Z axis
0.00
YesYes
Homing, please wait... Homing completed
Up arrow: Extruder will elevate, away from the platform;
Down arrow: Extruder will descend, move close to the platform;
Calibration
To calibrate the initial distance
between extruderand platform.
After homing completed，slide
the piece of paper continuously
back and forth between the
nozzle and the build plate. And
simultaneously manually tap
up and down arrow to adjust the
distance until the paper causes
a slight friction. Tap [OK] to
complete calibration.
1/2
<
2/2
<
Ar
Status
Language
Calibration Home
1/3
< <
Status
Language
Calibration Home
1/3
< <
Status
Language
Calibration Home
1/3
< <