User's Manual
Finder User Guide | www.flashforge.com 0086-0579-82273989
52
pops up. You need to select “Wi-Fi” in Connect Mode. Enter into the IP Address
shown on the interface and then click [Connect].
6-19
If successfully connected, you will see the following red mark.
Connect Finder with your PC under STA mod
ĸ
e
a. Turn on the WIFI of Finder and connect your PC with Finder via the WIFI. Press
[ Tools ], [ Setting ], [ WIFI ],and [ WIFI ON].
b.“Finder” continuous signal will be found available on the network list.
c. Once your PC is connected with your Finder. Open the Internet browser and
enter “10.10.100.254” and enter the default user name(admin) and
password(admin).
620
e You will enter the WIFI setting panel, it displays as follows: