User's Manual



Finder User Guide | www.flashforge.com 0086-0579-82273989
78
needed. Press down the left mouse button and drag to generate the support.
2
˅
Manual Delete
8-11
Like the picture above, a hole inside the model doesn’t need any supports.
Left click the [Delete] button and then left click the supports needed deleting. And the
support will be deleted.
8.2 Control over Printing Quality
Enhance the build plate adhesivenessķ
 Leveling the build plate
 Keeping the build plate smooth and tidy
 Using the build tape or glue
Adjusting the printing speedĸ
 Low (Fast) (Print Speed 80mm/s Travel Speed 100mm/s)
 Standard (Print Speed 60mm/s Travel Speed 80mm/s)
 High (Slow) (Print Speed 50mm/s Travel Speed 70mm/s)
 Hyper (Print Speed 50mm/s Travel Speed 70mm/s)
8.3 Skills of Model Placement