User's Manual

Hunter User Guide | www.flashforge.com 0086- 0579-82273989
48
6-5
6.2 Methods of printing
Printing from USB
1. Connect Hunter to the computer with the USB cable.
2. Turn on the Hunter.
3. Select [ Print ] from menu bar, then select [ Connect ].
4. Click on [ Rescan ], then [ Connect ].
5. Now the printer is connected with FlashPrint.
6. Press [ Print ] icon, and a printing options screen will appear.
7. Save the file at any location, and the object will start slicing.
8. After slicing the object, it will automatically upload the gcode to the Hunter.
Printing from USB disk
1. Press [ Print ], and a printing options screen will show up.
3. Click [ OK ], and save the gcode file in the USB disk.
4. FlashPrint will begin slicing the 3D model.
5. After slicing the object, take the USB disk from the computer. Insert it into the USB
disk slot on the Hunter.
6. Press [ Print ] and then press the middle USB disk icon.