User Manual

InventorⅡ
InventorⅡ
User Guide |
User Guide |
www.f
lashforge.com
lashforge.com
16
Tap [Setting] to enter the setting interface
Ÿ
Language: To set the display language
Ÿ
TP Adjust: Adjust the touch screen
Ÿ
WIFI: To turn on/down the WIFI
Ÿ
Servo on: To turn on/down the servo
Ÿ
Printhead Adjust:
distance between the extruder and the
build plate
Ÿ
Filament Check Off: To turn on/off the
filament check
Ÿ
Factory Reset
Ÿ
Return arrow
TP Adjust
To tap the “+” on the touch screen to
adjust the touch
0086-
0579
Tap [Setting] to enter the setting interface
Language: To set the display language
TP Adjust: Adjust the touch screen
WIFI: To turn on/down the WIFI
Servo on: To turn on/down the servo
Printhead Adjust:
distance between the extruder and the
build plate
Filament Check Off: To turn on/off the
filament check
Factory Reset
：
Return arrow
TP Adjust
To tap the “+” on the touch screen to
adjust the touch
0579
-82273989
Tap [Setting] to enter the setting interface
Language: To set the display language
TP Adjust: Adjust the touch screen
WIFI: To turn on/down the WIFI
Servo on: To turn on/down the servo
Printhead Adjust:
To adjust the initial
distance between the extruder and the
Filament Check Off: To turn on/off the
：
return to factory setting
To tap the “+” on the touch screen to
adjust the touch
screen.
Tap [Setting] to enter the setting interface
Language: To set the display language
TP Adjust: Adjust the touch screen
WIFI: To turn on/down the WIFI
Servo on: To turn on/down the servo
To adjust the initial
distance between the extruder and the
Filament Check Off: To turn on/off the
return to factory setting
To tap the “+” on the touch screen to
Tap [Setting] to enter the setting interface
To adjust the initial
distance between the extruder and the
Filament Check Off: To turn on/off the
return to factory setting
To tap the “+” on the touch screen to