User Manual

InventorⅡ User Guide | www.flashforge.com 0086-0579-82273989

4-2

(4-3) When it shows that the distance is too big, please unscrew corresponding nut

under platform clockwise until hearing a steady beep and the [Verify] button appears.

5-4

4-3

(4-4) If the distance is appropriate, tap [OK] to second point leveling. If still not,

please follow the prompts to adjust again till you see [OK] button.

4-5

(4-5) Repeat steps 2 through 4 above to complete second and third points leveling and

then Tap [Finish] to exit.