User Manual

InventorⅡ User Guide | www.flashforge.com 0086-0579-82273989
54
6-4
Note：If you’ve place your model in a right place, you can skip the step above.
(6-5) Click the Print icon on the top, you should make some setups for your print job.
Preview: If you check the [Preview] box, you can preview your model after slicing is
done.
Print When Slice Done: If you print via USB cable, you can check the box, while if
you print via USB, you should not check the box.
Machine Type: Flashforge InventorⅡ
6-5