User Manual

InventorⅡ User Guide | www.flashforge.com 0086-0579-82273989
56
6.2 Print Methods
After generating the Gcode file, you can transfer it to your InventorⅡ. You can
transfer the file through USB cable and USB stick.
6.2.1 Print from Computer (USB connection)
Connect your ① InventorⅡ with your PC via a USB cable.
Turn on your ② InventorⅡ, level the build plate and load the filament.
③ Click [Print] and transfer your Gcode file to your InventorⅡ. After
completing transference, the printer will heat up automatically. And when heating
finishes, the print will start to build the model.
6-8
6-8
④When your PC connects with FlashPrint successfully. The status box on the
bottom right displays the real-time nozzle temperature. After finishing preheating,
your InventorⅡ starts the print job directly.
6.2.2 Print from Computer (WIFI connection)
① Connect your InventorⅡ with your PC via WIFI.
② Turn on your InventorⅡ, level the build plate and load the filament.
③ Click [Print] and transfer your Gcode file to your InventorⅡ. After
completing transference, the printer will heat up automatically. And when heating
finishes, the printer will start to build the model.