User's Manual

set up a reconfirmation menu, must be confirmed by the user, this time the
button confirmed;
3, Enter the initialization interface, initialization process and power-
on initialization operation, after initialization will restart the system.
Unlock
1、 In dormant or wake-up state, the card entered into the card area to
unlock;
2、 In dormant or wake-up state, put the finger into the fingerprint box
to verify the unlock;
3、 Wake-up state will have entered the password input after the key to
verify the unlock;
4、 Click the back panel to unlock the key (OPEN) to unlock;
5、 Dynamic password (WeChat Mini Program) unlock, please read the
company's "dynamic password operation instructions ".
Lock lock
1、 Click the lock key on the front panel in dormant or wake-up state.
2、 Click the back panel to close the lock.
3、 After the automatic delay lock is turned on, the countdown time of
dormant state after unlocking will automatically turn off the lock.
Electronic backlock
Press the rear panel lock button 2 S, wait for the front panel to prompt
"the door has entered the anti-lock mode" or "the door has withdrawn from
the anti-lock mode ", enter the anti-lock can only be unlocked by the
administrator, ordinary users can not unlock.
Note: please use this function carefully.
doorbell
In dormant or wake-up state, click the front panel doorbell key (if there
is no doorbell key, use the key reuse), this time will ring two doorbells,