Data Sheet

- 12 -

The debug programming interface, as shown above, does not support standard JTAG

connections at this time. We recommend using the SWD connection as shown below.

3.6.2. Module debutting and Programming interface connection

Figure 3-15. SWD connection mode

3-16. The relationship between module debugging, programming interface and JTAG interface is

shown below.

Zigbee module pin

number

20 pin JTAG interface pin

number (name)

SWD Connection mode pin

number (name)

1、2(VCC)

1(VCC)

2(VCC)

——

3(nTRST)

——

4(GND)

——

5(JTDI)

——

SWD debug programming

interface