User's Manual

II. PAIRING THE WIRELESS REMOTE
STEP 1：
Push in on bottom of remote to release battery cartridge and install three
AAA batteries into the remote battery compartment.Push in firmly to
close.
STEP 2：
 Plug the base into a power source and press the Pairing
Button/Program Button on the control box approximately in
1s,ensure the Pairing Lamp - White (Third) flashing.
STEP 3：
 Press “SW” until the backlight LED flashing, release it and
then press “HEAD UP”, never release until the backlight LED
is lighting all long, the remote is pairing and release it.
 When the Pairing Button/Program Button on the control box and
the backlight LED on the remote stop flashing, and the buzzer on
the control box has a “DI” sound,pairing is completed.
 If the function on the remote can not be operated, repeat
the pairing again.
Second, Press “HEAD UP”,
never release until the backlight
LED is lighting all long and then
release.
First, Press “SW” button until
the backlight LED flashing and
then release.
Pairing Button/Program Button
Pairing Lamp - White (Third)