Quick Guide

4
NOTE!
Use the adjustable bracket to adjust monitoring direction.
4 Mount Your Camera
4.1 (Optional) Insert the Micro SD Card
You need to install a Micro SD card first if you want to save video on an on -board SD
card. Insert the Micro SD card into the side card slot. Before you insert or remove
the Micro SD card, be sure to disconnect power and wait till the camera stops
operation; otherwise, the camera or the Micro SD card may be damaged.
4.2 Wall Mount
The camera base, pre-installed with magnet, attaches to magnetic surfaces. If wall
mounting is adopted, make sure the surface of the wall is flat and clean. Fix the iron
plate to the wall before mounting the camera. The detailed steps are as follows.
1. Fix the provided iron plate to the wall, mark the positions of holes on the plate,
and drill 5.8mm-5.9mm guide holes on the wall according to the positions.
Micro SD card slot