Quick Guide
Table Of Contents
5
3.2
Cables
The appearance and tail cable may vary with device model.
NOTE!
For specifications, see the latest product datasheets.
Press and hold the RESET button for at least 15 seconds to restore factory
default settings. Perform this operation within 10 minutes after the device is
powered on or the reset will fail otherwise.
4
Mount Your Camera
4.1
(Optional) Insert the Micro SD Card
For cameras that support Micro SD, you need to insert the Micro SD card after opening
the bottom cover of camera. Do not hot plug the Micro SD card after it is inserted.
Otherwise the camera or the SD card might be damaged.
For recommended SD card specifications, please contact your dealer or technical
support.
1.
Loosen the cross-recessed screws to open the bottom cover.
2.
Insert the Micro SD card.
Power
interface
Network
interfa
ce
IP
Network