Quick Start Guide

Prepare a Print Job
Ensure Your Pro is Ready
Install resin tank and build platform in their places.
It is extremely important to make sure both the build
platform and resin tank are fully secured and locked
before you start a print.
Refer to steps 5-7 to ensure your equipment is ready
before starting the print.
Get Software Download SprintRay Software from sprintray.com/software
Using Desktop Software to Prepare a Print
After launching SprintRay Software, begin by selecting your
printing material and the desired layer thickness. Next, import
your STL model, orient the model, and add supports if
necessary. If you are new to 3D printing, consult our website
and full user manual for more detailed information.
The model is now ready for printing. Now that everything is
set on the software side, follow the below instructions to
prepare your Pro printer.
Make sure your printer and your computer are both connected
to the same wireless network.
Once you've prepared both the software and hardware for your
print, click on the printer icon in SprintRay Software.
The software will process the job and send it to your printer.
The build platform should slowly descend into the resin tank.
Once this has happened, the print process has begun.
Your printer runs independently once it begins its print process.
Any changes to your network or computer will not effect print
progress as long as Pro maintains power.
Note: It's very important to ensure that the lid remains closed
during the entire print cycle.
Start a Print
Compatible with
Mac and Windows
A B
Fill the Resin Tank
Before you pour resin into your Pro’s tank, it is
important to shake the bottle until it is
thoroughly mixed.
When starting a print, the desktop software or
touchscreen of your Pro will display the resin
level necessary for the planned job.
Fill the tank to the suggested level, ensuring
even distribution of the resin across the tank.
Close the lid of the printer or cover the resin
tank at all times to minimize light exposure.
9
10
7
8
MAX 500mL
MED 400mL
MIN 300mL