User's Manual
User manual
The lights are installed by EX39 lampholder. Users can control the
brightness of the lights and switch them on or off with their mobile phones
and computer.The control process is realized through the zigbee signal
of the lights and gateway. When you execute a control command, the gateway
will send a zigbee signal. The antenna on the lamp then picks up the signal
and performs the action.
1. Account registration-Send the username and email address
toChenzw@yankon.com.
2. Login username by https://www.megaman-system.com/login.
3. Send the Mac of lights and the gateway to the background
administrator(Chenzw@yankon.com) for addition.
4. Turn on the lights. Control the lights on the web.
FCC Warning
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This equipment should be installed and operated with minimum distance 20cm between the radiator&
your body. This transmitter must not be co-located or operating in conjunction with any other antenna
or transmitter.