RFID Asset tag User manual Zhejiang Zhier Information Technology Co., Ltd. Version, Manual Vision 1.
Dear customer: Hello! Thanks for choosing Enjoyor technology products and services. To ensure your satisfied use, please read the user manual carefully before using this product, And please keep the manual properly for future reference. Whenever you need our service and support, Please be freely to let us know. Before using This product Must be used by medical personnel who had received training by the manufacturer.
Table of Contents 1.Application ................................................................................................................. 1 2. Product composition ................................................................................................ 1 3. Specifications ............................................................................................................ 2 4. Installation .................................................................................................
1.Application Application, It is used for asset location management system, which is convenient for the location and search and statistics of equipment on the floor, and improves the effective utilization rate of equipment. The asset tag has a unique device ID number, When the tag passes through the locator, the tag senses the area number of the locator and sends a positioning number signal to the server. The server software draws the corresponding trajectory map according to the positioning number.
3. Specifications 1. Frequency: Support 433MHz, 125KHz reception. 2. Working voltage: 3VDC. 3. Working temperature and humidity: 5 ℃ ‐40 ℃, 0‐90% RH. 4. Atmospheric pressure: 860hPa‐1060hPa 5. Size: length * width * thickness = 40mm * 40mm * 8mm 6. Equipment battery capacity: 3.2VDC, 200mAh 4. Installation This product is bound to the equipment that needs to be tracked. The bottom of the label can be placed with our 3M back adhesive.
5. Precautions 1. When installing and using, please notice that the label cannot be placed inside the metal of the device, and it should be placed in a metal‐free space, which will not affect the operation of the device. 2. This product is with a built‐in battery. If it is damaged and unavailable, do not discard it freely. Please placed them together and contact with us. 3. This product is not waterproof, so pay attention not to place it nearby the water area. 4.
6. The packing box need to be longer than 10cm from the ground and 50cm from the wall; 9. Basic Troubleshooting Table 1, Troubleshooting list SN Problem 1 Solution 1. Check the battery status of the asset tag in the software to see if there is power. 2. Whether the tag is added in the asset management system and the positioning function is enabled. 3. Check whether the Tag is well pasted with the device. 4. If there is no response after the previous test, Please return to our company for repair. 1.
10. Packing list Table 2, packing list SN Name Quantity Unit 1 Asset tag 10 Pc. 2 Instructions 1 Pc. CE Caution: Use the Product in the environment with the temperature Between ‐10℃ and 40℃; Otherwise, it may damage your product. Products can only be used below 2000m altitude For the following equipment: Product Name: RFID Asset Tag Brand Name: ‐‐ Model No.: E‐AL01 Zhejiang Zhier Information Technology Co., Ltd. E‐mail: qiliping@enjoyor.
FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
