User Guide
Table Of Contents
- Product List
- Get to Know SMOOTH-Q3
- Battery Charging Instruction
- Installation and Balance Adjustment
- Stabilizer Mode Description
- Indicator Lights and Buttons Description
- Balancing the Phone
- How to Use
- Standby Mode
- Manual Angle Lock
- How to Use the App
- Main App Features
- Calibration and Firmware Upgrade
- Six-side Calibration
- SMOOTH-Q3 Firmware Upgrade
- Motor Fine-Tuning
- Product Specifications
- Disclaimer and Warnings
- Safe Operation Guidelines
- Warranty Card
- Contact Card
7
Installation and Balance Adjustment
When putting the stabilizer back into the box, please rotate the phone clamp to
the storage state as shown in the image.
Storage state Phone clamp tightened
There are fixing buckles for the tilt axis and the roll axis. Please rotate in the
correct direction to prevent the fixing buckle from damaging.
5. Extend the phone clamp and put the phone into the phone clamp. Make sure the
phone camera is on the outer side of the clamp as shown in the image to avoid
blocking the camera.
SMOOTH-Q3 should have a smartphone mounted on and balanced before
powering on. If no smartphones are mounted, the motor will make a sound and
enter standby mode automatically.