User Guide
Table Of Contents
- Product List
- Get to Know SMOOTH-Q3
- Battery Charging Instruction
- Installation and Balance Adjustment
- Stabilizer Mode Description
- Indicator Lights and Buttons Description
- Balancing the Phone
- How to Use
- Standby Mode
- Manual Angle Lock
- How to Use the App
- Main App Features
- Calibration and Firmware Upgrade
- Six-side Calibration
- SMOOTH-Q3 Firmware Upgrade
- Motor Fine-Tuning
- Product Specifications
- Disclaimer and Warnings
- Safe Operation Guidelines
- Warranty Card
- Contact Card
19
Calibration and Firmware Upgrade
Use "Zhiyun Gimbal Tools" for six-side calibration.
1.Visit the official website of ZHIYUN (www.zhiyun-tech.com) , go to the
corresponding product page, click "Download", download the calibration upgrade
tool and the USB drive and install.
2. Connect SMOOTH-Q3 to the computer.
3. Power on SMOOTH-Q3 and enter standby mode.
4. Open "Zhiyun Gimbal Tools", click "Open" and click "IMU Calibration". Follow the
prompt to place SMOOTH-Q3 correctly for calibration.
calibration
① Please refer to the six-side calibration steps below. After the calibration is
completed, please restart the stabilizer.
In simple terms, six-side calibration is to place all six sides of the phone clamp in
vertical to a level surface respectively.
Six-side Calibration